What are the precautions for operating a single beam crane

What are the precautions for operating a single beam crane

The operation of a single beam crane involves multiple aspects such as equipment safety, personnel safety, and environmental safety. When using a single beam crane, operators should pay special attention to the following matters. Next, let's follow the Chinese bridge crane price editor to learn more:

1. Preparation before operation

Check the condition of the equipment: Before operation, the operator should inspect the crane, including mechanical, electrical, safety protection devices, etc., to ensure that the equipment is in good condition.

Check if the hook, wire rope, pulley, brake, etc. are intact and undamaged.

Check if the limit switch and overload protection device are functioning properly.

Check whether the electrical control system and cables are safe, and whether the grounding is reliable.

Check the working environment:

Ensure that the working area of the crane is free of obstacles, the ground is flat and free of standing water, and the crane can operate normally.

Confirm that the weight of the lifted object is within the rated load range of the crane, ensuring the stability of the Z-center of the lifted object.

Prevent other operators from entering the working range of the crane to avoid collisions or injuries.

Personal protection:

Operators should wear appropriate protective equipment, such as safety shoes, helmets, etc.

2. During the operation process

Start operation:

Before starting, make sure the power is turned on and the control switch is in the safe position. Before starting, preheat the equipment in order to avoid premature overload operation.

Operators should be familiar with all control devices of the equipment and ensure that the control panel and buttons are clearly labeled.

Lifting operation:

When lifting, it should be carried out slowly to avoid sudden start and stop, in order to prevent the lifting object from shaking.

Overloading lifting is strictly prohibited to ensure that the bearing capacity of the hook and wire rope is not exceeded. Before using the crane, the weight of the lifted object should be confirmed and matched with the rated lifting capacity of the crane.

When lifting objects, ensure that the object is stable and avoid shaking or falling.

Walking operation:

The walking operation of the crane should be smooth and slow, avoiding sharp turns or rapid acceleration to prevent equipment and lifting objects from shaking.

When walking, maintain a clear view and ensure that you do not encounter obstacles or other equipment.

Rotation operation:

When rotating, make sure there are no obstacles around and ensure that there are no other personnel within the operating range.

Rapid rotation and sudden stopping are strictly prohibited to avoid violent swinging of the suspended object.